Search
Close this search box.

Building Material - Various List :

Polypropylene Fibers

Polyclonal fibers with high performance and high resistance to chemicals to avoid cracking of the concrete, or else the problem of plastic shrinkage of concrete. Fiber Diameter: 25mm on average lengths of 3mm (in multiples of 3) more frequent of 12mm. Meet the requirements of European Directive 89/106 / ΕΕC to construction products and the requirements of European standard BS 14889-2: 2006 (Certification System 3: Table ZA.1) Offered in water soluble bags, ready for admixing in concrete and mortars.
 

Steel fibers LaGramigna

Fibres function as a diffused element of strength that “sews” the flaps of the crack together and therefore it is clear that fibres become efficacious and improve concrete performance only after the matrix has set. La Gramigna steel fibres are specially shaped at the end for more efficient anchoring. The most important structural applications of concrete reinforced with La Gramigna steel fibres are currently industrial flooring, prefabrication sector and sprayed concrete.
 

Gutters guard

Prevents leaves and concentration of dirt in the gutters of the roof. Applies to various gutters dimensions Supports for paving slabs Plastic circular supports with notches. Used for secure placement of paving slabs over the insulating plates. These supports can handle the corners of four pavement slabs “clicked” on the insulation while holding the slabs spaced 1,5 cm from it. In this way, it becomes easier the placing of the plates, the ventilation of the construction and avoiding moisture and mold, is ensured and achieved.
 

Mapefix VE SF

MAPEFIX VE SF. Styrene-free, hybrid vinyl resin-based chemical anchor for structural loads. Certified for threaded bar, construction bars and C1 seismic loads.
 

Polythene

Polythene (nylon) is a plastic, produced in thin film form, categorized either by the surface weight (gr / m2) or by its thickness (in gauge or mm). The correspondence is 1000 gauge = 250 micron = 0.25mm. Various uses: light polyethylene type (86 micron) perfect protection against the PAINTWORK, spraying or as a dust cover and wrap during transport and storage. Medium polyethylene type (125 micron) ¬ for protection and cover for furniture and large objects. Ideal for protecting floors during painting and decorating. Ideal for protecting floors during painting and decorating. Also used for cloches, for increasing soil temperature, etc., and for medium type wrapping during transport and storage. Durable polyethylene (250 micron) Perfect for heavy duty applications such as vapor barrier, mixing cement, temporary roof covering, windows temporary repairs, industrial protection, weather protection and heaviest type wrapper during transport and storage
 

Roof vents

Ventilator of insulation, height 24cm, with suitably shaped pad for bonding to bituminous waterproofing membranes and very resistant to sunlight. The vent is an essential component of a bituminous waterproofing system. Below the gooseneck vents, circulate vapors that are discharged to the environment, through them.

Support ταρατσόπλακας

Ready to use thin layer silicon decorative topcoat, organic based, without cement, suitable for indoor or outdoor use and all substrates. Enhanced with protective film for resistance to microorganisms (mold, algae, fungi). In a wide range of grain sizes for different styles and appearance of the texture of the final surface.
 

Tekapur Polyurethane foam

Ready to use thin layer silicon decorative topcoat, organic based, without cement, suitable for indoor or outdoor use and all substrates. Enhanced with protective film for resistance to microorganisms (mold, algae, fungi). In a wide range of grain sizes for different styles and appearance of the texture of the final surface.
 

Bau R4

One-component fiber-reinforced, non-shrink, highly thixotropic, repair mortar modified with polymer
enhancers for structural and demanding repairs. Meets the requirements of European standard EN 1504- 3 class R4

 
en_USEnglish